Pot bearings – RESTON-POT


mageba RESTON-POT bearings ensure the controlled transfer of forces between a structure’s superstructure and its substructure. They also facilitate rotations about every axis and movements in every direction. They are so conceived, that they transfer vertical forces to the substructure and permit rotations thanks to an elastomeric pad which is enclosed in the bearing.


RESTON-POT bearings are suitable for use in structures with low to high loading and frequent movements and rotations.

Image gallery

  • RESTON-POT-img1

    Composition of a guided sliding bearing (Type TE) with a guide bar on each side

  • RESTON-POT-img2

    Installed free sliding bearing (Type TA) with movement scale

  • RESTON-POT-img3

    Installed TA and TF bearings with anchor plates

  • RESTON-POT-img4

    Bearing which can resist horizontal forces in one direction (Type TE)

  • RESTON-POT-img6

    Underside of the sliding plate with polished metal sheet

  • RESTON-POT-img7

    Positioned and concreted TE bearing with dowels